- :86-371-86151827 86151527
- :0086-371-86011881
- :[email protected]
- :bebonchina
stainless steel 2205 / S32205 steel round bar,2205/S32205 forging round bar
The specification we can offer now
Φ8-Φ50; Φ55-Φ100; Φ100-Φ150; Φ150-Φ200;
≥Φ200（forging round bar）
Processing
1.Welding Characteristics:
Possesses good weldability
Should not generally be welded without filler metal as this may result in excessive ferrite
2.Heat Treatment:
Annealing temperature range is 1868 to 2012°F (1020 to 1100°C)
Cannot be hardened by heat treatment – but Duplex 2205 does work-harden
Special consideration is needed to compensate for a higher coefficient of thermal expansion to avoid warping and distortion
3.Processing – Hot Forming:
Most Duplex 2205 producers recommend a maximum hot forming temperature between 2010 and 2100°F (1100 to 1150°C). If the shape of the work piece is not compact, the edges may be significantly cooler than the bulk, and there is risk of cracking in the cooler regions.
4.Processing – Cold Forming:
Duplex 2205 has shown good formability in a variety of fabrications. The high strength of Duplex 2205 can pose problems. Even when the equipment has sufficient power, allowance must be made for higher spring-back caused by the grade’s high strength.
5.Machinability:
Duplex 2205 is somewhat more difficult to machine than the 300 series austenitic stainless steels. Higher cutting forces are required and more rapid tool wear is typical. Some guidelines for machining are: A) Use powerful, rigid machines with extremely strong rigid mounting of tools and work piece, B) Minimize vibration by keeping the tool extension as short as possible, C) Use a nose radius on the tool, no longer than necessary, for carbides that have a sharp edge while still providing adequate strength, D) Design machining sequences to always provide for a depth of cut below the work hardened layer resulting from the previous passes.
We BEBON are the leading manufacturer and supplier of stainless steel 2205 / S32205 steel round bar,2205/S32205 forging round bar that are manufactured using high quality raw material and advanced technology.