Product Categories

:86-371-86151827 86151527
:0086-371-86011881
:[email protected]
:bebonchina

Henan Bebon Iron&Steel Co.,Ltd is a steel-bar-specialized factory, located in zhengzhou city, south of henan province. Found in 2000, it takes an area of 520,000 square meters.

Home > Products > Gear steel bar > Views20Cr2Ni4A

20Cr2Ni4A

The material 20Cr2Ni4A is a kind of structural alloy steel. 20 cr2ni4a is high quality alloy steel and it has high strength,toughness and hardenability.For 20Cr2Ni4A steel, there is no direct quenching after carburizing in order to reduce surface residual austenite. 20Ci2Ni4A’s cutting and cold deformation plasticity is general and it has poor weldability.

20 Cr2Ni4A is widely used for large cross-section carburized parts, such as large gear, shaft, and conditioning components requiring high strength, and good toughness.

20Cr2Ni4A chemical composition %:

Grade	Chemical composition %:
Grade	C	Si	Mn	P	S	Cr	Ni
20Cr2Ni4A	0.17-0.23	0.17-0.37	0.30-0.60	≤0.03	≤0.03	1.25-1.65	3.25-3.65

20Cr2Ni4A mechanical properties:

Grade	Mechanical properties:
	Tensile strengthσb (Mpa)	Yield strengthσ0.2 (Mpa)	Elongationσ5 (%)	reduction of area ψ (%)	Hardness	Notched bar impact strength αkv (J/cm2)
	min	min	min	min	max	min
20Cr2Ni4A	1483	1292	13	57	434HB	75

20Cr2Ni4A condition of delivery: heat treatment(Normalizing, Annealing, or high temperature tempering) or do not heat treatment state.

If you have need for 20Cr2Ni4A forged round bar, 20Cr2Ni4A forged square bar, 20Cr2Ni4A forged square bar, 20Cr2Ni4A forged shafts and 20Cr2Ni4A forged blocks. Please contact with us freely. Bebon will offer you more than your expect.