SAE1008 Stamping and cold forming steel round bar Specification Tolerance

SAE1008 steel round bar is stamping and cold forming steels,which is according to ASTM standard,and based on the different thickness,the tensile strength of SAE1008 is 420MPa.The ASTM SAE1008 is also equal to DIN1614:RRSTW23, JISG3131:SPHE and EN10111:DD12 steel.

SAE1008 Stamping and cold forming steel round bar, under ASTM standard.ASTM SAE1008 carbon steels at room temperature (25°C) ranges from 190 to 210 GPa. The typical density of carbon steels is about 7.85 g/cm3. ASTM SAE1008 is mainly used as stamping and cold forming steels.

SAE1008 steel round bar Chemical composition(%)

C≤0.10 Mn≤0.45 P≤0.035 S≤0.035 Si:0.17-0.37 Cr≤0.25 Cu≤0.25 Ni≤0.25

SAE1008 steel round bar Mechanical properties

Yield strength Mpa:170-320 Tensile strength Mpa:420 Elongation(%):25-30

SAE1008 Stamping and cold forming steel round bar Specification

Dimensions: 10-900mm

Length: 6-12m

Tolerance: H9 H10

Place of Origin: Henan, China

Delivery Time:30-50 days, 7 days for stock goods.

Loading Port:Shanghai ,Tianjin, Qingdao.

Offer Ability:5000MT/Per Month.

Surface treatment: Black or as your demand

Delivery Condition

AR(As Hot Rolled), N(Normalized), T(Tempered), Q(Quenched), TMCP, Q+T(Quenched and Tempered), UT(Ultrasonic Test:ASTM A435,ASTM A578-C/B/A,EN10160-S0E1,S1E2,S2E3,S3E4), Impact Test, PWHT(Post Weld Heat Treatment), HIC, Z Test(Z15, Z25, Z35)

Bebon International steel can be offer 1-1/4CR, 2-1/4CR, 5CR, 9CR, 9, P5, P9, P11, P12, P22, P91 under ASTM SAE1008 Stamping and cold forming steel round bar. We hold true concept of customer first, providing customers with good quality and good service of SAE1008 steel round bar.If you have any requirements about ASTM SAE1008 steel,pls contact with us freely.

• Tel: 0086-371-86151827 86151627
• Fax: 0086-371-86011881
• [email protected]